Entity E100 Series User Manual Download Page 4

E-BI

KE S

YSTEM - E100 S

ERI

ES

E-BI

KE S

YSTEM - E100 S

ERI
ES

4

5

DANGER - 

HANDLING THE BATTERY

Be sure to read this user's manual thoroughly before use, and 

follow the instructions for correct use. Keep it a safe place for 

later reference

IMPORTANT NOTICE

Only use the specified ENTITY battery for the bike – the 

battery contains Samsung cells as well as the sophisticated 

Entity battery management system that controls the many of 

the e-bike functions. Using non-standard batteries, even if 

they look the same, can seriously damage the e-bike system, 

can result in battery fire or explosions, and will. void warranty.

Be sure to observe the following in order to avoid burns or 

other injury from fluid leakages, overheating, fire 

or explosions.

• Do not deform, modify, disassemble or apply solder directly to the 

battery. 

• Do not leave the battery near sources of heat. Do not heat the 

battery or throw it into a fire. 

• Do not subject the battery to strong shocks or drop it. 

• Avoid contact with metal objects (paper clips, coins, keys, nails, 

screws, or other small metal objects, as this may short-circuit the 

battery. Shorts caused in this way will invalidate any 

warranty claims.

• Do not place the battery into fresh water or sea water, and do not 

allow the battery terminals to get wet. 

• If any liquid leaking from the battery gets into your eyes or skin, 

immediately wash the affected area thoroughly with clean water, 

and seek medical advice immediately. 

• Do not use the battery if it has any noticeable scratches or other 

external damage. 

• Do not use the battery in temperatures outside these ranges.

During discharge: –10 °C to 50 °C. During charging: 0 °C to 40 °C.
• During storage keep the battery at a charge level of at least 40%

• Follow local regulations when disposing of used batteries. If you 

are not sure, consult the place of purchase or a bicycle dealer.

CAUTION

CHARGING THE BATTERY

• Only use the ENTITY specified charger and observe the specified 

charging conditions when charging the specified battery.

• When charging, make sure there is no water on the charging port 

or the charger plug.

• Do not allow children to play near the product whilst charging

• Close the charging port cap when not charging.

• Be careful of the following whilst charging the battery when it is 
mounted to the bicycle:

     • Ensure that the battery is locked into the battery mount before 

charging.

     • Do not remove the battery from the battery mount while 

charging.

     • Stabilize the bicycle to ensure that it does not collapse during 

charging.

     • Do not move or ride the bicycle, whilst the battery is being 

charged. 

Summary of Contents for E100 Series















Reviews: