POWER FACTOR CONTROLLER
RG3-15C/CS/CL/CLS
14
Make a selection by using
UP
/
DOWN
buttons.
In this menu; alarms and ratios(reactive/active ratios) are reset.
The alarms which occur when the device operates are reset in this menu.
To reset the alarms,
yES
option must be selected.
NOTE: When an alarm occurs, the alarm relay switches on and the
related alarms LED turns on and the alarm code is displayed. Even if
alarm conditions disappear, the alarm relay will stay switched on. By
using the reset menu, alarms are reset and alarm relay is switched off.
If alarm conditions still exist, even if alarms are reset in the reset
menu, alarm relay switches on again. If alarm conditions disappeared,
alarm relay continues to its normal operation.
3.7.a Alarm Reset Operation Setting
3.7 Reset Operation Settings
Using the
UP/DOWN
buttons, find the reset menu option(rESEt).
When reset menu is selected, Reset LED turns on.
Press the
SET
button to enter reset (rESEt) setting options.
Press the
SET
button to set the alarm (ALAr) setting which is
the first setting in the reset (rESEt) menu.
Select
yES
with
AÞAÐI/YUKARI
buttons to delete alarm
values, select
no
to cancel deleting operation and press
SET
button.
Make a selection by using
UP
/
DOWN
buttons.
Press the SET button for 3 s in order to enter the menu.
3.7.b Reactive/Active Ratio Reset Setting
Reactive/active ratio, which is calculated by the device, is reset in this
menu.
SAUE
If you want to leave the setup menu without making any other
changes, press the
ESC
button until
SAVE SEt yES
shows
on the screen. If you want to save the changes, press the
SET
button. If not, press the
ESC
button.
Using the
UP/DOWN
buttons, find reactive/active ratio reset
menu(rAtE) which is the second setting in the reset(rESEt) menu.
Press the
SET
button to enter the reactive/active ratio reset
settings.
Using the
UP/DOWN
buttons, select
yES
to delete
reactive/active ratio or
no
to cancel the delete process and then
press
SET
button.
