Enterasys SecureStack B3G124-24P, Installation Manual

Page: 21 / 78

Overview
SecureStack C3 Installation Guide 1-3
C3G124-48P Stackable Switch
The C3G124 ‐ 48P ( Figure 1 ‐ 2 ) has several types of front panel port connections, which
include:
• Forty ‐ eight RJ45 ports (10/100/1000 Mbps, 1000BASE ‐ T copper ports) that also
support PoE for connections to network 803.2af compliant PDs (powered devices).
• Four SFP slots for optional Small Form Pluggable (SFP) Mini ‐ GBICs for 1000BASE ‐ SX/
LX fiber ‐ optic connections and 1000BASE ‐ T copper connections.
• Rear panel connectors for high ‐ speed connections in a stack configuration.
• Rear panel Redundant Power Supply connector used to connect to a PoE Redundant
Power Supply (C2RPS ‐ POE). The switch connects to the C2RPS ‐ POE using a
C2RPS ‐ POE cable.
The 10/100/1000 Mbps fixed front panel ports can operate in either half ‐ duplex or full ‐
duplex mode, as determined by Auto ‐ Negotiation.
Note: The Mini-GBIC ports cannot be active simultaneously with their corresponding
10/100/1000BASE-T ports. For example, if SFP port 48 establishes a link first on the
C3G124-48P, the 10/100/1000BASE-T built-in RJ45 port 48 is not available and
vice-versa.
Caution: The C3G124-24P and C3G124-48P are PoE-compliant devices. Do not connect
a SecureStack Redundant Power System (C2RPS-SYS) to the power connector.
Otherwise, damage to the device may result.
Precaución: Los dispositivos C3G124-24P y C3G124-48P cumplen con el estándar PoE
(power over ethernet). No conecte una fuente de poder redundante (RPS) SecureStack
(C2RPS-SYS) al cable de corriente. De lo contrario, el dispositivo puede dañarse.