Enterasys Matrix 7G4280-19, Hardware Installation Manual, Page: 32 / 92

Required Tools
3-2 Installation
Required Tools
Tools needed to install the 7G4280 ‐ 19 and options include:
• Phillips screwdriver
• Flat blade screwdriver
Unpacking the DFE Module
Unpack the DFE module as follows:
1. Open the box and remove the packing material protecting the DFE module.
2. Verify the contents of the carton as listed in Table 3 ‐ 1 .
3. Remove the tape seal on the non ‐ conductive bag to remove the DFE module.
4. Perform a visual inspection of the DFE module for any signs of physical damage.
Contact Enterasys Networks if there are any signs of damage. Refer to “ Getting Help ”
on page xviii for details.
Installing Optional Network Expansion Module (NEM)
Refer to your release notes or the Enterasys Networks web site for the latest available
network expansion modules.
Installing a NEM involves
• removing the coverplate from the DFE module (7G4280 ‐ 19),
• installing the NEM, and
• installing the Mini ‐ GBICs.
Refer to the installation instructions shipped with the NEM for details.
Table 3-1 Contents of 7G4280-19 Module Carton
Item Quantity
7G4280-19 1
Installation Guide 1
Customer Release Notes 1
Note: Install any optional equipment before proceeding to “ Backplane Connections and
Installation Rules ” on page 3-7 for an explanation of the rules to install different series
modules in a Matrix E7 chassis.