NO. NX2010597/ NO. 72983_C
06/04/2021
2 (35)
4P
R
-F
14
-D
General
- Before unpacking
> Verify that the product in its packaging has not been damaged during transport.
> Verify that the product is suitable for the intended installation.
- Before installation
> Carefully read the operation guide before installing or using this product.
> Perform the installation carefully, ensuring that the equipment remains clean throughout the operation.
- After installation
> If you are installing this product for someone else, leave the guide for the end user.
> Clean the work area after installation.
Legal notices
-
The product may only be installed by a competent person with adequate training in the installation practices
and with adequate knowledge of proper safety and installation practices for electrical equipment. If local
regulations have requirements relating to this training or adequate knowledge in terms of the installation of
electrical equipment, the aforementioned requirements must be complied with by this person.
-
Ensto Novexia declines all liability for any property damage or personal injury caused by poor installation,
mishandling, or failure to comply with safety recommendations.
WARNING
For the operation of this system in complete safety, it is essential that the installers, users and technicians
follow the procedures and precautions described in this guide. Non-compliance with these instructions may
cause damage to the products and/or serious or even fatal injury.
This document is the property of Ensto Novexia. It may not be copied or disclosed to third parties without
written permission. Non-contractual documents, drawings and photos. The information and instructions
provided may change without prior notice.