12
RAK112_ENG / © Ensto 2019
5.2 EVF100 / EVF200 mounting on concrete casting at site
Items needed:
Ground mounting box EVTL32.00 / EVTL34.00
1 pcs
Anchor
bolts
M12
4
pcs
Washers
Nuts
Make sure that the materials used for the concrete foundation and the installation procedures follow local
building regulations and safety standards.
•
Dig a pit for the concrete foundation. The pit floor should be trampled and horizontal.
•
Put cable and possible drain pipes in place.
•
Fill the pit with concrete.
•
Let the concrete solidify, make sure the surface stays solid and level during the process.
Installation steps
1.
Drill a hole in the concrete for the anchor bolts. For more information see the anchor bolt instructions.
Use the ground mounting box as a jig.
415
110
43 (EVTL32.00)
38 (EVTL34.00)
M12
(150)
(64)
86
Cable protection
pipe Ø110
Horizontal
adjustment
Washer upper surface
measured from ground
level
Anchor bolt
Concrete
Select anchor bolts depending
on the thickness and strength
of the concrete
