19
The micro SD memory card has already been installed.. If necessary, you can remove it by fi rst pressing the
card in (3) to unlock it and then pulling it out (4). To insert repeat in reverse steps 3 and 4 (5). When insert-
ing the card, make sure that its contact surface is against the connectors of the device.
To insert the battery, align its contact surface with the connectors in the
battery housing and insert the battery in the direction of the arrow (6).
Charging the ECO691 battery
The battery is charged when you insert the operating panel in the wall-
mounting bracket. If the bracket has not been installed, you can use the
USB charger. To start charging, connect the charger to the USB connec-
tor of the device. When the battery charge symbol indicates full charge,
you can remove the charger. You can use the device during charging.
Switching ECO691 on/off
If the wall mounting bracket is used the ECO691 switches on automatically. When used on battery mode
press the POWER key next to the battery to activate the operation panel. Use the RESET key to switch off
/restart the device. You can also switch off the device by selecting ‘
Switch off
‘ from the Settings menu.
ECO691 normal display
micr
o
SD
a Btt
ery
1
mi
c o
r
D
S
2
3
4
5
6
Time
Date
Signal
strength
Battery charge
status
Outdoor
temperature
Current electrical
consumption
Changes the
device settings
Information regarding
the consumption
Indicator of current energy consumption
compared to the average
consumption of the previous week
Consumption scale: The border between
red and green is the average consumpti-
on for the previous week
