ensto Chago Media, Installation Instructions, Operation Instructions

Page: 5 / 49

RAK107
22.5.2018
5
1 Introduction
This document describes the installation, operation and
troubleshooting tasks for Ensto Media 46”.
1.1 Safety notices and display handling
The voltage level inside the display and the charging point is 230 –
400 V
AC
. Only qualified electricians are allowed to perform electrical
installations and maintenance tasks.
The display must be handled carefully like any other piece of glass.
Any mechanical shocks, blows, drops and stress should be avoided.
DANGER
Take extra caution to handle live display, as there is electric
shock risk.
WARNING
Take extra care to prevent the electro static discharges from
damaging the electronics components inside the display
while the display unit case remains opened. Maintenance
personnel should use the protective
ESD gloves or ESD
bracelet . Ensto recommends using ESD bracelet connected
to DIN rail to make the earth connection.