ensto Chago Media, Installation Instructions, Operation Instructions

Page: 15 / 49

RAK107
22.5.2018
15
4.2 Charger door opening
Both charging doors must be opened in order to open display’s door.
There are four M5 torx pin-head screws on both charging doors to
lock them in place. Remove these screw to open both charging doors.
Screws are located right next to the display structure.
To ease handling of the charging doors, there are hinges supporting
opening of them.
4.3 Display’s
door and panel opening
To enter display’s
component, both the door
and the TFT-LCD panel
must be opened. They have
hinge system to ease the
procedure. There are also
telescopic supports to
further ease the handling.
1. Open the display’s door using a triangle key. Turn the key to
clockwise. Note! Turn the key from the wings.
2. Lift the door a bit from the lower edge. The door structure will
open to an angle of 92°.
Picture 6 Charging doors locking screws (M5
Torx pin-head)