ENSOTECH SWAVE-E2, User Manual

Page: 9 / 24

9
Firmware Update
Before starting the Firmware update, you should be sure that your phone has enough cache memory and not many
unnecessary apps operating in the background. You may use any phone optimisation app to clear the cache memory and
background apps.
Keep the phone screen on without entering sleep mode or the power saving mode during firmware updating to prevent
update termination. Otherwise, you have to update again. If you use a Bluetooth connection, DO NOT WALK WITH THE PHONE!
Leave it near the ESC.
Ensure the process operates under a strong, stable, seamless internet connection.
The transmitter/radio must present OFF or unplug the receive cable from ESC to update the firmware.
Please process throttle calibration after the firmware is updated.
FW version:65535 in terms of "firmware update failure either firmware broken", and need to recover the firmware by
updating the firmware again.
Firmware update does solve failure hardware.
In case of a new firmware release, the
notification pop-up; you can accept or
discard it.
Or, if you want to do it manually,
choose the context menu in the right
corner and push the button to check for
updates.
IOS is limited to managing the system.
If too many background apps and
commands exist, it may take up to 25
to 30 minutes to update the firmware.
ESC performs one beep when the update is complete, and the blue light is back on.
Require throttle calibration after the firmware update.
The completion percentage may move backwards and continue because some files are lost during the upgrade process and
need to be reinstalled, which is normal.