ENSOTECH SWAVE-E2, User Manual

Page: 5 / 24

5
Full
Throttle
Neutral
point
BEEP
BEEP
BEEP
Calibration finish!
To operate ESC without throttle calibration, the ESC can be damaged!
** Some advanced transmitters have radio channel encoding features. For example SANWA system use SSL/SSR open
channel encrypting protocol that requires some time to establish the connection between itself and the receiver (Especially
aftermarket receivers ! ). Under these conditions, the Swave ESC delay for half a second to engage the calibration process or
difficulties with calibration may occur. You may disable this mode.
** For some earlier KO radio systems, it may need to reverse the radio throttle direction to activate the calibration.
** Beep sound created by the motor's slightly movement. It may be loud or weak due to the soldering quality, battery power,
motor Kv, and gear ratio (if the esc is installed on the car already).
** Light indications also notice if the environment is challenging to hear beeps.
** No beep sound, which means insufficient current flow between battery, esc and motor, do not try to run the car; check all
connections and soldering.
** If calibration fails, restart from step 1
** Swave ESC was designed to calibrate with the most popular and current radio system available on the market. An
obsolete radio system may not be able to launch the calibration process because of a dilatory delay of signal transmission
between the radio, receiver and esc
Find the Swave App
"Swave ESC" programming apps can download from Google Play
™ / App Store.
Registration
Android users require to register to use full functions.
IOS users are no future required to register on version 1.2 or later, and the earlier version still requires registration.
Registered users can use email/username
and password to log in.
You can restore the password by Email
Create an account, create a username
and password, and enter a valid email
address. A confirmation email is being
sent to you to activate your account in
a minute.
Please check your spam email box if
you did not receive the email.
Your name is shown in the settings
column if you are a registered user.