ENSOTECH SWAVE-E2, User Manual

Page: 1 / 24

User Manual
SWAVE-E2 / W / W2 / W3
1:28 mini R/C car
V2.0
20221030/ENG/
中文
Things to know before starting Swave ESC
Read this manual carefully and look at the equipment be become familiar with the device before trying to install, operate,
service, or maintain it.
Please do not solder the cables and install them on the vehicle if you disagree with the following. Signs of wires connecting
to the esc see as acceptance.
Please always check other peripheral devices and chassis are functioning correctly before support requests. Ensotech
warranty does not cover alterations to the product not performed by us, damage to the product due to unusual or non-
recommended use of the product or damage to the product where any factors beyond our control cause the damage.
Damage a product after purchase; or
For product features, technical specifications, visual attributes and accessories, please visit the product description in the
Ensotech shop.
Mounting Cables (Swave-E2/W/W2/W3)
The below photo is the back side of Swave-W3. There is an open hole to accommodate a black colour electronic component.
It suggested not laying over when applying double-sided adhesive tape to prevent the part pull off when removing the
double side adhesive tape.