OEX-6sr Operation Manual
3) Routing an Instrument*Sequence Track or Audio Track to
an OEX-6sr Stereo Output
You can also route a signal to the OEX-6sr by using the OUT
parameter on the Edit/Track page. This method overrides the
previous example and requires the results to be saved as a part of a
bank.
l
Follow step one above.
l
Select desired track.
l
Press
Edit
then
Track.
Scroll using the
Left/Right
Arrow
buttons until you see this display:
OUT= WAVESAMPLE
Please note that depending on the previous configuration,
WAVESAMPLE could be replaced by BUS 1, BUS 2,
BUS 3, AUX 1, AUX 2, or AUX 3. Also note that Audio
Tracks do not have a WAVESAMPLE setting. As
described above, set the OUT value to AUX 1. The
display should now look like this:
OUT=AUX 1
By assigning an
Instrument*Sequence
Track
to AUX
1, you have overridden the output routings set on the
Edit/Amp page. The signal on the selected track is now
being routed to AUX 1. One benefit of using the Edit/
Track OUT parameter to configure your output routings
is that you can quickly assign different
Instrument*Sequence
Tracks or Audio Tracks to
different outputs for mixing purposes. See
Section 18
-Audio Track Applications
for more information on
Audio Track output routing.
12
