11
headboard bracket installation guide (optional)
Headboard Brackets are an optional accessory. To purchase optional accessories, please call 1-844-534-3676
A 9/16” (14 mm) & 1/2” (13 mm) socket and crescent wrench are necessary to complete installation.
STEP 1
a.)
Align the bracket and to the holes in the frame with the tabs
facing outward. Loosely secure the bracket to the leg post with
two bolts, nuts and washers.
b.)
Loosely secure the bracket to the frame with one bolt, nut
and washer. The bracket can be moved forward or backward
to adjust spacing between the head of the base and the
headboard.
Once the bracket has been spaced to accommodate the
headboard, secure and tighten the bolts, nuts and washers.
a
b
a
b
STEP 2
Attach the plastic spacer and T-Bracket.
a.)
Measure the distance between the mounting holes on the
headboard and install the spacer and attachment plate to
accommodate the headboard.
b.)
To install the plastic spacer and attachment plate, you will need
(2) long bolts and (2) nuts. Place the spacer and attachment
plate in the desired location and slip the bolts through the holes
with the head of the bolt facing outward. Position the bolts
diagonally on the spacer. Use the 9/16” (14 mm) socket and
wrench to tighten the bolts.
You may now connect your headboard to the attachment plates
using the remaining short bolts and nuts to secure it to the
brackets. The heads of the bolts will face outward. Use a 9/16"
(14mm) socket and 1/2" (13mm) wrench to tighten the bolts.
STEP 3
