TM
BrightEye 75
BrightEye 75 - Page 15
Trim Menu
The
Trim
menu provides an advanced level of adjustment to match your BE75 to
a particular source if needed. Use the
Trim
menu to fine tune the color
parameters of the output signal up or down, positive or negative. The values
shown below are typical, though each BE75 may vary.
•
When input is Cpst, adjust
Composite Trim
and
Saturation Trim
from -100 to 100.
•
When input is Y/C, adjust
Composite Trim
and
Saturation Trim
from -100 to 100.
•
When input is RGB, adjust
CAV Y/C Trim, CAV Cr/R Trim
and
CAV Cb/B Trim
from -100 to 100.
•
When input is SMPTE, adjust
CAV Y/C Trim, CAV Cr/R Trim
and
CAV Cb/B Trim
from -100 to 100.
•
When input is BETA, adjust
CAV Y/C Trim, CAV Cr/R Trim
and
CAV Cb/B Trim
from -100 to 100.
