BrightEye 75 HD/SD Analog to Digital Converter and Analog Audio Embedder
BrightEye 75 - Page 14
Config Menu
Use the
Config
menu to set the following output conditions for the output signal:
• Signal Mute
– select the condition for muting the output signal to
No Muting
,
Mute On Noise
, or
Freeze on Noise
.
• Analog Setup
– set to
On
if setup is present on the analog input, or
Off
if
no setup is present.
• V Blanking
– set the vertical blanking to
Narrow
(NTSC: lines 1-9,
PAL: lines 1-6) or
Wide
(NTSC: lines 1-20, PAL: lines 1-22).
• Comb Mode
– set the comb filtering to
Comb On
or
Comb Off
.
• Peak Indicator
– selects the amount of headroom used in determining
peak indication. Chose
Clipping
,
2 dB Headroom
,
4 dB Headroom
,
6 dB Headroom
,
8 dB Headroom
, or
10 dB Headroom
.
• Dig Ref Level
– selects the digital reference output level. Choose
-20 dBFS
or
-18 dBFS
.
• Anlg Ref Level
– selects the analog audio input level for embedding.
Choose -
10 dBu
or
+4 dBu
.
