TM
BrightEye 90-FA
Pressing the
Right Arrow
or
Left Arrow
advances the selection within a given
section of parameters, or increases (Right Arrow) or decreases (Left Arrow) the
value of a selected parameter.
The LED of an edited parameter will blink for 15 seconds, after which time its value is
stored in memory. If power is interrupted before this 15 second timeout period has
elapsed, the edited state will not be not saved.
USING THE BRIGHTEYE CONTROL APPLICATION
The BrightEye PC and BrightEye Mac applications included on CD-ROM are
designed to allow you to configure and control the BrightEye 90-FA from a
personal computer. Installation and instructions for using this software applica-
tion are given in the PDF manual on disk. If the BrightEye 90-FA is connected to
a computer running this software, the following menus are available for control-
ling and monitoring the unit.
Video In
•
Input Pres
– indicates the status of the video input
(720p/50, 720p/59.94,
720p/60, 1080i/50, 1080i/59.94, 1080i/60, 1080p/25, 1080p/23.98, 1080p/24,
1080sF/25, 1080sF/23.98, 1080sF/24, No Input, or Unknown.)
.
•
Captions In
– indicates the presence of closed captioned material on the
input signal
(None, Line 21, CEA 708)
. The BrightEye 90-FA translates
between CEA-608 and CEA-708 standards for closed captioning as needed.
•
Ref Source
– use this control to set the reference input source.
Video In
Ref
indicates that the video output will be locked to the incoming video
signal.
Ext Ref
indicates that the video output will be locked to the external
reference input.
•
Reference
– indicates the status of a reference video presence
(
Ref Mismatch
,
Ref Unlocked
,
Ref TLS Lock
,
No Reference
,
Ref 525
Lock
,
Ref 625 Lock
).
•
Laser Status
– indicates the presence of a valid optical signal on the
HD/SD SDI Optical Out
BNC (
Laser OK
,
Laser Fail
).
BrightEye-13
NOTE
: