MODULE CONFIGURATION AND CONTROL
The eight GPI inputs on the 5820 module must be mapped to the Avenue modules to be
controlled using the menus in the Avenue PC application or an Avenue Touch Screen
Panel. Module status can also be read from the remote control menus or status is
indicated by front panel LEDs. The module indicators are illustrated in the
Front Panel
Controls and Indicators
section below.
For setting the parameters remotely using the Avenue PC option, refer to the
Avenue PC
Remote Configuration
section of this document.
For setting the parameters remotely using the Avenue Touch Screen option, refer to the
Avenue Touch Screen Remote Configuration
section of this data pack following
Avenue PC.
Front Panel Controls and Indicators
Each front edge indicator and switch setting is shown in the diagram below.
Model 5820 GPI/Serial Interface Module
5820-6
Run green
LED:
OFF
:
A power fault or halted CPU
ON
:
A halted CPU
FAST BLINK
:
CPU Run error
SLOW BLINK
:
System OK. (If SPI control is
active from the main frame
System Control Module, all
Run
indicators will be syn-
chronized.).
