Avenue PC Remote Configuration
The Avenue PC remote control status menu for this module is illustrated and explained
below. For more information on using Avenue PC, refer to the Avenue PC Control
Application Software data pack that came with the option.
5820 Avenue PC Menus
There are eight GPI menus in the Avenue PC application,
GPI 1
–
GPI 8
, one to corre-
spond to each available GPI port. Set the parameters for each of the GPI inputs as follows:
•
GPI 1 – 8 Mode
– set to
On
,
GPI High
(GPI triggered by pulse going high) or
GPI
Low
(GPI triggered by pulse going low).
•
Mem Reg
– select the memory register (1 – 5) on the corresponding module that
has been configured for recall.
•
Frame Adr
– enter the AveNet address of the frame containing the module you
wish to control.
•
Slot Number
– enter the
Slot Number
of the module in the selected frame.
A
Status
box shows the current status of the GPI port as
Off
(GPI turned off),
Connect
(5820 is successfully communicating with the module), or
Fail
(5820 cannot communicate
with selected module).
5820-7
Model 5820 GPI/Serial Interface Module
