You can learn a battery powered universal wireless transmitter into the ENSA-RS1 to trigger an out-
put to a light. For example, wiring an ENSA-RS1 to a LED Floodlight, and wiring the wireless receiver
to a reed switch in a door. When the door is opened, the wireless receiver is triggered which acti-
vates the remote switch, which in turn, illuminates the LED Floodlight. This combination on devices
can be used with items such as Digital Video Recorders, Security Alarms and Access Control Systems.
3.
Using the ENSA-RS1 with the – Wireless PIR
You may connect a Battery Powered Outdoor PIR to ENSA-RS1 wireless receiver as outlined in exam-
ple 2. If the PIR is trigger, it will activate the wireless receiver, which in turn activates the remote
switch and the device that is connected to the zone.
Installation and Configuration Instructions
WARNING!
1.
Before opening the cover of the ENSA-RS1, ensure the power supply to the device is isolated.
2.
Read the installation instruction before attempting to wire up the device.
3.
This product is for installation only by a qualified Electrician
The remotes included in the pack are already programmed and ready to use. Zone 1 (button A) and Zone 2 (but-
ton B) can be operated independently in latching or timed mode. Default configuration for Zone 1 & Zone 2 is
latching.
4.
Antenna – Fit a 25cm length of insulated wire to the Antenna terminal. Best to use single stranded stiff cop-
per wire, 1 or 2mm
2.
Direct wire as near to vertical as possible.
Zone Configuration:
ZONE 1
Latching - remove the jumper on terminals 1 and 2
Timed - insert the jumper on terminals 1 and 2
ZONE 2
Latching - remove the jumper on terminals 2 and 3
Timed - insert the jumper on terminals 2 and 3
