8VHU0DLQWHQDQFH
&OHDQLQJRIDSSDUDWXV
To clean the unit, turn it off. Clean the unit with a damp cloth. Do not use abrasive cleaners. A small
amount of mild household detergent may be used, if desired.
3DWLHQWFDEOH
Check the cable regularly for damages and/or bad electrical contact. We advise to keep a spare patient
cable in stock.
&DUHRIHOHFWURGHV
The electrodes supplied with the TensMed 931 units are self-adhesive and can be used several times.
Skin must be allowed to breath therefore the electrodes should be removed periodically. When not in use
the electrodes should be placed back onto the clear plastic shield.
The condition of the electrodes does affect conductivity and, consequently, the performance of the unit.
When the electrodes initially lose their adhesive quality it is possible to reactivate the adhesiveness by
applying a fine spray of water. When used on clean skin and stored correctly, electrodes will last for
about 14 days.
(QGRIOLIH
The TensMed contains materials that can be recycled and/or are noxious to the environment. Specialized
companies can dissemble the unit and sort out these materials. When you dispose of the unit, first inform
yourself about the local regulations concerning waste management.
6WLPXODWRU2XWSXW3DUDPHWHUV
Wave form
Biphasic Rectangular, Rectangular Alternating
Pulse Width
20 – 350 µs
Pulse frequency
2 – 100 Hz
Surge mode
SYNC – ASYNC between channel 1 and 2
•
Ramp up / down
0 – 5 s in steps of 0.25 s
•
Work time
0 – 60 s in steps of 1 s
•
Rest time
0 – 99 s in steps of 1 s
Amplitude
0 – 90 mA
Treatment time
10 – 20 – 30 – 45 – 60 – 90 minutes and continuous
