enphase ClipperCreek LCS, User Manual

Page: 21 / 36

LCS User Manual
Page 21
MOUNTING PROCEDURES
Locate the wall mounting position of the EVSE:
• On the hardwired LCS, the three service conductors are shielded by
three feet of flexible conduit. The LCS must be positioned such that this
conduit can reach a nearby service panel or junction box.
• On the plug-in LCS-P, the NEMA plug head is connected by nearly one
foot of cable to the top side of the LCS-P. The LCS-P must be
positioned such that this plug can safely be inserted into a wall-
mounted NEMA socket.
• Position the bottom of the LCS at a comfortable height and at
least 18 inches above the ground. Ensure that the LEDs on the front
panel of the EVSE can clearly be seen by anyone who will be operating
the device.
• The LCS has four mounting holes spaced in a 2” wide by 10” tall
rectangular pattern. Use a template to mark hole locations on the wall.
WARNING:
For safety, always turn off input power to the EVSE at the
circuit breaker panel prior to plugging it in or wiring it to the service
lines. Likewise, turn off the circuit breaker prior to unplugging it or
disconnecting the unit from the service lines.
AVERTISSEMENT:
Pour sécurité, toujours désactiver le courant
d’entrée de la station de recharge au niveau du disjoncteur du panneau
avant de le brancher ou de câblage à les lignes de service. De même,
coupez le disjoncteur avant de le débrancher ou déconnecter l’unité à
partir des lignes de services.
ADVERTENCIA:
Por razones de seguridad, siempre apague
la alimentación de entrada a la estación de carga en el panel de
interruptores automáticos de circuito antes de enchufarlo o cablearlo a
las líneas de servicio. Igualmente, apague el interruptor automático de
circuito antes de desenchufarlo o desconectar la unidad de las líneas de
servicio.