B – for tractors not equipped with hydraulic lift position control:
The chain supplied with the machine must be used.
Fasten bracket G (Fig. 25) and the limiting chain
free holes of the tractor’s third point.
Lower the machine to work position, until lifting lever
distance of 4 mm from the edge, as shown in Fig. 24. Limiting
must be taut (Fig. 25), and the lifting lever must be at a distance of 4 mm.
as per Fig. 24.
To be able to always recognize this position, mark the chain ring that will
be hooked with bracket G.
ROTARY DM 4-5
USER’S AND MAINTENANCE MANUAL
for tractors not equipped with hydraulic lift position control:
The chain supplied with the machine must be used.
(Fig. 25) and the limiting chain H supplied, to one of the
free holes of the tractor’s third point.
Lower the machine to work position, until lifting lever F is positioned at a
distance of 4 mm from the edge, as shown in Fig. 24. Limiting chain H
), and the lifting lever must be at a distance of 4 mm.
To be able to always recognize this position, mark the chain ring that will
SER’S AND MAINTENANCE MANUAL
Edition March 2010 -
Pagina 18 di 52
18
Fig. 25