Fig. 7
7
th
assembly – assembly of internal protective flap.
Mount flap R (Fig. 9) protecting the gear case and fasten it with connecting bracket
washer M10 + self locking nut M10
starting to tighten them.
8
th
assembly – assembly of the belt protection case.
Mount case U (Fig. 10), fasten with screws
ROTARY DM 4-5
USER’S AND MAINTENANCE MANUAL
Fig. 8
assembly of internal protective flap.
protecting the gear case and fasten it with connecting bracket S and three screws
self locking nut M10). To facilitate assembly of flap R, it is advisable to insert all screws before
assembly of the belt protection case.
, fasten with screws V (T.E. M10x120), washers and self-blocking nuts (M10).
SER’S AND MAINTENANCE MANUAL
Edition March 2010 -
Pagina 10 di 52
10
Fig. 8
and three screws T (TTQS
, it is advisable to insert all screws before
blocking nuts (M10).