9
th
assembly – compensating spring.
Hook spring W (Fig. 11) on pin Y
To facilitate this operation, attach the machine to the tractor, lifting it until the support hole is aligned with pin
10
th
assembly – assembly of the release cord.
Insert cord A (Fig. 12) through ring
through ring E and tie safety hook
Mount hydraulic pipe G on the hydraulic piston, with the perforated screw, positioning the copper washers (Fig. 13).
Fig. 11
ROTARY DM 4-5
USER’S AND MAINTENANCE MANUAL
compensating spring.
Y of the protection support and fasten it with an elastic pin Ø 6x40
To facilitate this operation, attach the machine to the tractor, lifting it until the support hole is aligned with pin
assembly of the release cord.
through ring B, then fasten the hook to safety hook C. Close the hook with a pliers. Insert cord
and tie safety hook C (Fig. 13), making a knot in the hole.
on the hydraulic piston, with the perforated screw, positioning the copper washers (Fig. 13).
Fig. 12
SER’S AND MAINTENANCE MANUAL
Edition March 2010 -
Pagina 12 di 52
12
en it with an elastic pin Ø 6x40.
To facilitate this operation, attach the machine to the tractor, lifting it until the support hole is aligned with pin Y (Fig. 11).
. Close the hook with a pliers. Insert cord D
on the hydraulic piston, with the perforated screw, positioning the copper washers (Fig. 13).
Fig. 13