EnOcean PTM 216B User Manual Download | Manualshive

Page: 62 / 86

background image

USER MANUAL

PTM 216B – BLUETOOTH

®

PUSHBUTTON TRANSMITTER MODULE

© 2022 EnOcean | www.enocean.com

F-710-017, V1.0

PTM 216B User Manual | v1.0 | February 2022 | Page 62/86

10.

Regulatory information

PTM 216B has been certified according to FCC (US), ISED (CA) and RED (EU) regulations.
Changes or modifications not expressly approved by EnOcean could void the user's authori-

ty to operate the equipment.

RED for European Market

The Radio Equipment Directive (2014/53/EU, typically referred to as RED) replaces R&TTE
directive  as  regulatory  framework  for  radio  products  in  the  European  Union.  All  products
sold final customers within the European Union have to be compliant to RED.  At the time
of  writing,  the  text  of  the  RED  legislation  was  available  from  this  link:

http://eur-

lex.europa.eu/eli/dir/2014/53/oj

Dolphin radio modules are components which are delivered to OEM manufacturers for their
use/integration in final or combined products. It is the responsibility of the OEM manufac-
turer to demonstrate compliance to all applicable EU directives and standards. The EnOcean
attestation of conformity can be used as input to the declaration of conformity for the full
product.

At the time of writing, guidance on the implementation of EU product rules – the so called
“Blue Guide” – was available from this link:

http://ec.europa.eu/DocsRoom/documents/18027/

Specifically  within  the  new  RED  framework,  all  OEM  manufacturers  have  for  instance  to
fulfill the following additional requirements:



Provide product branding (on the product) clearly identifying company name or
brand and product name as well as type, charge or serial number for market surveil-
lance



Include (with the product) documentation containing full postal address of the man-
ufacturer as well as radio frequency band and max. transmitting power



Include (with the product) user manual, safety information and a declaration of con-
formity for the final product in local language



Provide product development and test documentation upon request

Please

contact

an

accredited

test

house

for

detailed

guidance.

«
...
60
61
62
63
64
...
»

Summary of Contents for PTM 216B























































































Reviews:

No comments

Related manuals for PTM 216B

Brand: LAUREL Pages: 28

Brand: Omega Pages: 2

Brand: M-system Pages: 2

Portable Transducer

Brand: Humminbird Pages: 2

Brand: Igema Pages: 24

Brand: Zhongshan K-mate General Electronics Pages: 5

Brand: Mighty Mule Pages: 2

METPOINT PRM SP11

Brand: Beko Pages: 28

Bendix King Silver Crown Plus KX 155A

Brand: Honeywell Pages: 12

Brand: Honeywell Pages: 23

Bendix/King KY 196B

Brand: Honeywell Pages: 41

BENDIX/KING KY 96A

Brand: Honeywell Pages: 42

Bendix/King KX 165A

Brand: Honeywell Pages: 297

Brand: Honeywell Pages: 300

Brand: Honeywell Pages: 4

Brand: Honeywell Pages: 64

STT750 SmartLine

Brand: Honeywell Pages: 72

STT850 SMARTLINE

Brand: Honeywell Pages: 94

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands