SETTING UP YOUR EBIKE 13
Miller SE EBIKE USER MANUAL
Pressing the Down button for 3 seconds activates the
“Walk mode”, where the ebike will travel at a constant
speed of 6km/h.
Holding the Menu button for a few seconds brings up
the trip data reset screen.
Pressing the Menu button again prompts you to clean
the data and reset the trip meters.
Select Yes or No by moving the [ ] brackets via the Up
and Down buttons. Pressing the Menu button confirms
your selection and exits the trip data reset screen.
DO NOT RIDE THE EBIKE WHEN WALK
MODE IS ACTIVATED. IT IS ONLY DE-
SIGNED TO ASSIST PUSHING.
