EN
24
6. Clean and Maintenance
WARNING! RISK OF INJURY!
- Pull the mains plug before any adjustments,
maintenance or repair.
- Repair and servicing work not described in
this manual should always be carried by the
Service Centre. Use only the original parts.
- The following cleaning and servicing should
be done regularly. This will ensure a long
and reliable service life.
●
Do not spray the appliance with water and
do not immerse it in water. Electric Shock
hazard.
●
Keep clean the ventilation slots, motor
housing and handles of the appliance. Use a
damp cloth or a brush. Do not use cleaning
agents or solvents. You may otherwise
cause irreparable damage the appliance.
●
Have the supply cord repaired by
a manufacturer or an authorized
representative in order to avoid safety
hazards.
●
Dry the saw blades with a soft, lint-free
cloth.
●
Remove any dust deposits and, if
applicable, wood chips or material residues
from the quick-release chuck.
●
Clean the chip ejection opening with a
brush or by blowing out with compressed
air.
7. Storage and transport
∆ Switch off and unplug the appliance before
storage.
∆ Allow the product to cool down.
∆ Store the appliance in a dry and secure
place well out of reach of children.
∆ Remove the saw blade from the quick-
release chuck.
∆ If attached, disconnect the dust extraction
system for the appliance.
∆ Dry and protected from frost and heat.
∆ Always use the original package for storage
and transport.
8. Spare Parts/Accessories
Only use the accessories and additional
equipment that are specified in the operating
instructions.
