EN
25
9. Troubleshooting
NOTE
This appliance is maintenance-free. The
appliance may only be repaired by an
authorized in service center or Customer
Service. If one of the faults listed below occurs,
note the followings:
∆ Disconnect the appliance from any power
supply.
∆ Allow the appliance to cool down.
∆ Ensure that the appliance is in good
working condition.
Problem
Possible cause
Error correction
The appliance does not
start.
Mains plug is not connected.
Check the socket, mains cable,
mains plug, repairs to be carried out
by qualified electrician if necessary.
Main circuit breaker is tripped.
Check main circuit breaker.
ON/OFF switch may be defective
Repair by Service Centre
Motor faulty
The sawing performance
is insufficient.
Check the set stroke rate.
Select the correct stroke rate.
Check if the saw blade is worn.
Change the new blade.
The appliance becomes
hot.
Too much pressure on the
appliance during sawing.
Reduce pressure.
The stroke rate is too high.
Select the correct stroke rate.
Venting slots is not clear.
Clean the venting slots.
10. Disposal
To help the environment, please dispose
of the product properly when it has
reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
