EN
25
The battery status is displayed as follows by the
three LEDs of the battery level indication (LED)
(9).
LED color
Meaning
Green-Orange-Red
Maximum charge/
power
Orange-Red
Medium charge /
power
Red
Weak charge –
Recharge the battery
Press on the battery charge level button (8) on
the battery pack (1). You can read the battery
status from the battery level indication (LED)
(9).
Placing the bonnet on the buffing plate
WARNING!
Remove the battery pack before carrying
out any work on the product. Unintentional
activation of the ON/OFF switch can result in
injury.
1. Turn the polisher over so that the buffing
plate (4) is pointing upwards.
2. Place the bonnet (6) / (7) over the buffing
plate (4). Ensure that the bonnet is placed
centrally on the buffing plate(4).
5. Operation
Switching on and off
1. Switch ON : Press the ON/OFF switch (5) to
“I” position.
2. Switch OFF: Press the ON/OFF switch (5) to
“O” position.
Applying wax/polish with the terrycloth
bonnet
1. Always use high quality products for
waxing.
2. Apply the wax/ polish directly on the
working surface of the terrycloth bonnet
(6). Spread the wax/polish so that it forms
a thin, even, complete coating over the
terrycloth bonnet (6).
Note:
Too much wax/polish does not
necessarily achieve a better finish and you
will have to spend more time later removing
them.
3. Place the polisher on the surface to be
polished.
Note:
To avoid the splattering of wax/
polish, do not switch the appliance on yet.
Dab the appliance a few times at various
points on the area to be buffed. In this way
you can ensure that excess polish is once
more distributed evenly over the terrycloth
bonnet and the area to be buffed.
4. Hold the hand grips (3) with your two
hands firmly and switch the appliance on
by pressing the ON/OFF switch (5) to “I”
position.
5. Guide the polish evenly over the surface.
Note:
Do not press the polisher! The
self-weight of the polisher alone applies
sufficient pressure for the polishing
process.
6. Switch it off before removing it from the
area being buffed. To do this, press the ON/
OFF switch (5) to “O” position.
Polishing or removing wax with the synthetic
polishing bonnet
Note: the wax/polish must be allowed to dry
on sufficiently to produce the best polishing
performance. Otherwise any polish that is still
fluid will be smeared by the polishing bonnet.
1. Using the synthetic polishing bonnet (7) for
final polishing or removing the wax.
2. When working, always follow the
instructions for use of the wax/polish.
6. Cleaning and maintenance
WARNING!
Risk of injury. Always switch the product off
and remove the battery pack before carrying
out any work on the product.
●
Repair and servicing work not described in
this manual should always be carried by our
service center. Use only original parts.
●
The product must always be kept clean, dry
Summary of Contents for 154696.01
Page 2: ...A B 1 1 2 3 3 4 6 12 11 10 9 8 5 7...
Page 53: ...cod articolo 154696 01...
