TROUBLESHOOTING
1. No Power to Merlin ultra
•
Push the Power button on Merlin ultra
’s control panel. A light
next to the Power button should illuminate, indicating the power
is turned on.
•
Make sure the power supply cord is completely plugged into the
AC outlet.
•
Make sure the two parts of the power supply cord are securely
connected.
•
Make sure the power supply cord is completely plugged into the
DC 5V IN jack on the back of the viewing stand base.
•
Check the power strip/surge protector
’s on/off switch and circuit
breaker if Merlin ultra is plugged into one.
2. Blurred or Out-of-Focus Image
•
Clean the protective glass covering the camera with the non-
abrasive lens cleaning cloth provided with your Merlin ultra.
•
Clean the monitor screen with a non-abrasive cloth sprayed with
a glass cleaning solution.
•
Turn the
Auto Focus ON or OFF to adjust the specific type of
focus needed. Please see page 27 for more details.
•
Make sure the target material is steady on the tray. It might take
a few moments for the camera to achieve perfect focus after
motion has stopped. This is normal.
28
Troubleshooting
