The Portable Monitor can be used with the power supply connected
- or - using its own internal battery. The system is shipped from the
factory with the battery disabled.
Prior to first use the ‘Battery
Off/On’ Switch needs to be placed into the ‘ON’ position (See
Figure 1). The switch is located on the back of the portable
monitor. We strongly recommend that this switch be placed into
the ‘OFF’ position when you transport the unit.
The internal battery of the Portable Monitor is partially charged when
the unit is shipped from the factory. We recommend that you fully
charge the internal battery prior to the first use. Please follow the
instructions below.
Connecting the Power Supply & Charging the Battery
Connect the Power Supply & Power Supply Cord together (See Figure 2).
Connect the Power Cord to an outlet and the other end of the Power
Supply to the back of the Portable Monitor where it says “DC 19V In” (See
Figures 3 & 4).
Once the Power Supply is connected to both the wall and the system, the
Portable Monitor will start charging automatically. You can use the
Portable Monitor while charging is in process. The battery will charge
while in use as long as the system is plugged into an outlet. You cannot
overcharge the battery. However, the more charge cycles, the shorter the
battery life. Approximate charge time is 4+ hours (powered off), 5.5+ hours
(while in-use).
Figure 1
Figure 2
Figure 3
Figure 4
USING THE PORTABLE MONITOR
9
Summary of Contents for 13.3" Portable Monitor
Page 1: ...User Manual 13 3 ...
