Connecting Max / Flipper / Acrobat TV
If you have purchased the Portable Monitor to use with one of the
Enhanced Vision devices listed above, please follow the connections
below:
1) Connect one end of the RCA cable to the VIDEO input on
the Power/Control Box (See Figure 1 - A). Connect the
other end of the RCA cable to the VIDEO IN input on the
back of the Portable Monitor (See Figure 2 - A)
2) Connect the white right-angle end of the 12V Power Cord
to the POWER Input on the Power/Control Box (See
Figure 1 - B). Connect the red straight end of the Power
Cord to the DC 12V OUT on the back of the Portable
Monitor (See Figure 2 - B).
3)
Use the ON/OFF rocker switch on the side of the Control Box
to power ON your Enhanced Vision product.
We recommend
leaving it in the ON position and turning the entire system
On/Off with the Power button on the monitor once you have
done so.
4) Make sure the video source on the monitor is set to CVBS
input. You may need to press the ‘Video Source’ button on
the right side of the monitor a few times to toggle to CVBS
input. (See figure 3).
A
B
A
B
Figure 1
Figure 2
Figure 3
14
Summary of Contents for 13.3" Portable Monitor
Page 1: ...User Manual 13 3 ...
