A
M-TRAC1
IOM-55
May 2019
2
M-TRAC1
The M-TRAC1 has been certified by Intertek (ETL) for use with Engineered Air appliances only.
It has been evaluated to CSA C22.2 No. 24 Temperature-Indicating and Regulating Equipment
and UL 873 UL Standard for Safety Temperature-Indicating and Regulating Equipment. This is a
User Operation Manual and therefore not subject to evaluation.
If any errors or omissions are noted please contact the nearest Engineered Air Technical Service
Department.
To ensure warranty is honored, only qualified personnel should be employed for service and
troubleshooting. If further information is required please contact the nearest Engineered Air
office.
There are two sets of electrical drawings and unit function sheets provided with the appliance.
One set is in an envelope which also contains the Operation, Installation and Maintenance
manual(s). This package is for copying, then should either be returned to the appliance or
stored in a safe place. The other set is attached to the control panel door and should never be
removed.
Please report any omissions to the national service manager.
Warning: Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and
maintenance instructions thoroughly before installing or servicing this equipment.
Warning:
This unit is connected to high voltages. Electrical shock or death could occur if
instructions are not followed. This equipment contains moving parts that can start
unexpectedly. Injury or death could occur if instructions are not followed. All
work should be performed by a qualified technician. Always disconnect and lock
out power before servicing. DO NOT bypass any interlock or safety switches under
any circumstances.
