The Switch User’s Guide
z
VLANs and Trunk Groups
In order to use VLAN segmentation in conjunction with port trunk groups, you can
first set the port trunk group(s), and then you may configure VLAN settings. If you
wish to change the port trunk grouping with VLAN already in place, you will not need
to reconfigure the VLAN settings after changing the port trunk group settings. VLAN
settings will automatically change in conjunction with the change of the port trunk
group settings
5.4.1.2 VLAN Configuration
z
Port-based VLANs
Packets can only be broadcast among other members of the same VLAN group.
Note all unselected ports are treated as belonging to the default system VLAN. If
port-based VLAN are enabled, then VLAN-tagging is ignored.
1. First choose Port-based VLAN. Click “ok”
Figure 5-28
2. Click Add to create a new VLAN group.
Figure 5-29
3.Type the VLAN name, group ID and select the members for the new VLAN.
4. Click “Add”.
5. Then pitch on the port and click “Add” .The port will be the member for one
VALN.
48
