EnGenius ESR350H, User Manual

Page: 47 / 107

[ pg. 47]
8.4. Filter
When Enable Wireless Access Control selected, only wireless clients with MAC addresses listed in the table are allowed to connect to the wireless
network.
Enable Wireless Access Control

Description : Enter a description of the device allowed to connect to the
network.

MAC Address : Enter the MAC address of the wireless device.
Click Add to append a new device to the list or Reset to discard changes.
MAC Address Filtering Table

No. : The sequence number of the device.

Description : The description of the device.
 MAC Address : The MAC address of the device.

Select : Indicates the device(s) that can have actions performed on them.
Click Delete Selected to remove selected devices from the list.
Click Delete All to remove all devices form the list.
Click Reset the discard changes.
Click Apply to save the settings or Cancel to discard changes.