EnGenius ESR350H, User Manual

Page: 44 / 107

[ pg. 44]
8.2. Advanced
To change more advanced wireless features of the ESR350H , select the Advanced option of the Wireless section.
In the Advanced option, you can change the following:
 Fragment Threshold : This specifies the maximum size of a packet during
data transmission. A value too low could lead to low performance.
 RTS Threshold : If the packet size is smaller than the RTS threshold, the
ESR350H will not use RTS/CTS to send the data packet.
 Beacon Interval : This is the amount of time that the ESR350H will
resynchronize the network.
 Delivery Traffic Indication Message (DTIM) Period : The DTIM is a
countdown informing clients of the next point of broadcast and multicast
messages over the network. This is a value between 1 and 255.

N Data Rate : This is the rate in which the ESR350H will transmit data
packets to Wireless N compatible devices.

Channel Bandwidth : The factory default enables Auto 20/40MHz to
optimize the best performance by auto selecting channel bandwidth.

Preamble Type : Select either Long Preamble (better LAN compatibility) or Short Preamble (better wireless performance).
 CTS Protection : CTS Protection is recommended. It can lower the data collisions between Wireless B and Wireless G devices. Enabling CTS
protection will lower data throughput of the ESR350H .
 Tx Power : Select the wireless signal strength level. Valid values are between 10% and 100%.
Click
Apply to save your settings.