EnGenius EOC-3610s-EXT User Manual Download Page 43 | Manualshive

Page: 43 / 53

background image

11b/g Wireless Outdoor Multi-Client Bridge/AP

Version 1.0

43

primary RADIUS server. The second RADIUS server is consulted only when the
primary server is not available or not responding.

Click on the

Save Settings

button once you have modified the settings.

4.3.2 Advanced Wireless and WDS

Click on the

Advanced

link under the

Wireless

menu. This page allows you to

configure the fragmentation threshold, RTS threshold, transmit power, layer 2
isolation, and WDS (wireless distribution system).

Fragment Threshold

: Packets over the specified size will be fragmented in order to

improve performance on noisy networks. Specify a value between 256 and 65535.
The default value is 2346.

RTS Threshold

: Packets over the specified size will use the RTS/CTS mechanism to

maintain performance in noisy networks and preventing hidden nodes from
degrading the performance. Specify a value between 1 and 65535. The default value
is 2346.

Beacon Period

: Beacons are packets sent by a wireless Access Point to

synchronize wireless devices. Specify a Beacon Period value between 20 and 1000.
The default value is set to 100 milliseconds.

DITM Interval

: A DTIM is a countdown informing clients of the next window for

listening to broadcast and multicast messages. When the wireless Access Point has
buffered broadcast or multicast messages for associated clients, it sends the next
DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to
receive the broadcast and multicast messages. The default value is 1. Valid settings
are between 1 and 255.

«
...
41
42
43
44
45
...
»

Summary of Contents for EOC-3610s-EXT






















































Reviews:

No comments

Related manuals for EOC-3610s-EXT

Brand: TP-Link Pages: 2

Airlive WIAS-3200N

Brand: Ovislink Pages: 7

Brand: MFOURTEL Pages: 19

Brand: Topcom Pages: 45

Brand: Digisol Pages: 82

Brand: Hewlett Packard Enterprise Pages: 53

4G LTE CellSpot

Brand: T-Mobile Pages: 4

Brand: T-Mobile Pages: 11

Brand: Air Live Pages: 50

Brand: Air Live Pages: 160

Brand: YUNKE CHINA Pages: 35

Brand: EnGenius Pages: 2

Brand: High-Flying Pages: 17

AT&T Elevate 4G

Brand: Sierra Wireless Pages: 63

Brand: Sierra Wireless Pages: 74

Brand: Deco Pages: 64

Brand: Linksys Pages: 443

DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router

Brand: NETGEAR Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands