11b/g Wireless Outdoor Multi-Client Bridge/AP
Version 1.0
26
Bridge Name:
This feature controls the MAC address of the Bridge as seen by other
devices (wired or wireless). If set to
Ethernet Client
, the MAC address from the first
Ethernet client that transmits data through the Bridge will be used. This setting is
useful when connected to an Xbox or if there is only one Ethernet device connected
to the Bridge. When multiple Ethernet devices are connected to the Bridge, it may
not be obvious which MAC address is being used. If set to
WLAN Card
, the MAC
address of the WLAN card will be used. When multiple Ethernet devices are
connected to the Bridge, the MAC address of the Bridge will not change.
Fragment Threshold
: Packets over the specified size will be fragmented in order to
improve performance on noisy networks. Specify a value between 256 and 65535.
The default value is 2346.
RTS Threshold
: Packets over the specified size will use the RTS/CTS mechanism to
maintain performance in noisy networks and preventing hidden nodes from
degrading the performance. Specify a value between 1 and 65535. The default value
is 2346.
Transmit Power
: You may control the output power of the device by selecting a
value from the drop-down list. This feature can be helpful in restricting the coverage
area of the wireless network.
Click on the
Save Settings
button once you have modified the settings.
3.3.5 SNMP
Click on the
SNMP
link under the
Wireless
menu. This page allows you to SNMP
community and trap settings. The feature is useful while remotely monitoring and
marinating the device.
