background image

11b/g Wireless Outdoor Multi-Client Bridge/AP 

 

 

                                       Version 1.0 

 

 

 39 

 

 

4.3  Wireless Network Settings 

 

Click on the Wireless_Setting link under the Wireless menu. On this page you may 
configure the 802.11b/g radio. 

 

 

 

 

Wireless Network Name

: The SSID is a unique named shared amongst all the 

points of the wireless network. The SSID must be identical on all points of the 
wireless network and cannot exceed 32 characters. 

 

Visibility Status

: Select 

Visible

 or 

Invisible

. This is the SSID broadcast feature. If 

you set this value to Visible, then the clients will be able to find this SSID on a site 
survey.   

 

Channel

: Select a channel from the drop-down list. The channels available are 

based on the country’s regulation. Place a check in the Auto Channel Select box if 
you would like the Access Point to select the cleanest channel. 

 

Transmission Rate

: Select a transmission rate from the drop-down list. It is 

recommended to use the 

Best (automatic)

 option.   

 

802.11 Mode

: Select the IEEE 802.11 mode from the drop-down list. For example, if 

you are sure that the wireless network will be using only IEEE 802.11g clients, then it 
is recommended to select 

802.11g

 only instead of 

Mixed 802.11g and 802.11b

 

which will reduce the performance of the wireless network. Click on the 

Save 

Settings

 button once you have modified the settings. 

 

ACK Timeout

: You may specify a value for the acknowledge timeout.  However, it is 

recommended to use the default setting: 48. 

 
 

4.3.1.1  WEP (Wired Equivalent Privacy) 

 

Select the 

WEP

 radio button if your wireless network uses WEP encryption. WEP is 

an acronym for Wired Equivalent Privacy, and is a security protocol that provides the 
same level of security for wireless networks as for a wired network. 

 

WEP is not as secure as WPA encryption. To gain access to a WEP network, you 
must know the key. The key is a string of characters that you create. When using 
WEP, you must determine the level of encryption. The type of encryption determines 
the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys 
are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) 
or ASCII (American Standard Code for Information Interchange - alphanumeric 
characters) format. ASCII format is provided so you can enter a string that is easier 

Summary of Contents for EOC-3610s-EXT






















































Reviews: