12.4 Client Router
In Client Router Mode, the OM2P-LC/OM2P-HS’s internal DHCP server allows LANs to
automatically
generate an IP address to share the same Internet. Connect an Access Point/WISP wirelessly
and connect to LANs using a wired connection.
Refer to Chapter 13 to check the Access Point’s configuration.
Client Router
Step1
Log in to the Web Configurator with the default IP address
192.168.1.1
Step2 For
Operation
Mode,
select
Client
Router
from
System
Properties.
Step3 Change
your
Local
Area
Network
setting
to
Obtain
an
IP
Address Automatically.
Use site survey to scan Access Points that are available in nearby
Step4
areas.
Step5
Select the Access Point with you want to associate.
Set up authentication settings that match the Access Point’s
Step6
settings.
Step7
Set your WAN connection type using the WAN settings provided
by your ISP.
Step8
Click Apply to save all changes.
Client Router’s IP setting must match to the Access Point’s subnet.
Chapter 13 Building a Wireless Network
With its ability to operate in various operating modes, your OM2P-LC/OM2P-HS is the ideal
device around which you can build your WLAN. This appendix describes how to build a
WLAN around your OM2P-LC/OM2P-HS using he device’s operating modes.
