EnGenius ENH Series User Manual Download Page 69 | Manualshive

Page: 69 / 92

background image

Chapter 11 Management Settings

The Management section lets you configure administration, management VLAN, SNMP
settings, backup/restore settings, firmware upgrade, time settings, and log settings. This
chapter describes these settings.

11.1 Administration

Click the Administration link under the Management menu to change the user name and
password used to log on to the OM2P-LC/OM2P-HS Web Configurator . The default user
name is admin and the default password is admin. Changing these settings protects the
OM2P-LC/OM2P-HS configuration settings from being accessed by unauthorized users.

Name        Enter a new username for logging in to the Web Configurator.
Password       Enter a new password for logging in to the Web Configurator
Confirm Password Re-enter the new password for confirmation.
Remote  Management  Enable

or

disable

remote

management.

Remote Upgrade

Specify whether the OM2P-LC/OM2P-HS firmware can be upgraded

remotely.
Remote Management
Port

If remote management is enabled, enter the port number to be
used for remote management. For example: If you specify the
port number 8080, enter http://<IP address>:8080 to access

«
...
67
68
69
70
71
...
»

Summary of Contents for ENH Series





























































































Reviews:

No comments

Related manuals for ENH Series

Brand: D-Link Pages: 59

Brand: D-Link Pages: 24

Brand: 3Com Pages: 6

Brand: Telrad Pages: 10

Brand: Ruckus Wireless Pages: 4

Brand: Salto Pages: 3

WGR612 - 54 Mbps Wireless Router

Brand: NETGEAR Pages: 2

Brand: bintec elmeg Pages: 66

Brand: wattsonic Pages: 60

Barricade SMCWBR14S-N3

Brand: SMC Networks Pages: 106

Brand: Loopcomm Pages: 68

Brand: Bountiful Pages: 1

WAP11 - Instant Wireless Network Access Point

Brand: Linksys Pages: 33

Brand: Acer Pages: 63

Brand: Acer Pages: 38

Predator Connect X5 5G CPE

Brand: Acer Pages: 56

Brand: Acer Pages: 39

Brand: Acer Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands