EnGenius ECB300 Manual Download Page 99

Page: 99 / 113

SNMP
SNMP Active

Enable or disable the SNMP feature.

SNMP Version

You may select the SNMP version you want to deploy.

All:

Interoperability between SNMPv1 and SNMPv2c devices.

v1:

The standard SNMP version.

v2c:

Improvement in performance and security of SNMPv1.

Read Community

Specify the password for access the SNMP community for read only access.

Set Community

Specify the password for access to the SNMP community with read/write access.

System Location

Specify the location of the device.

System Contact

Specify the contact details of the device

Trap
Trap Active

Enable or disable SNMP trapping feature.

Trap Manager IP

Specify the IP address of the computer that will receive the SNMP traps.

Trap Community

Specify the password for the SNMP trap community.

Summary of Contents for ECB300


















































































































Search results

Summary of Contents for ECB300

Reviews:

Related manuals for ECB300

Brands by name

Popular brands

EnGenius ECB300, Manual

Search results

Summary of Contents for ECB300

Reviews:

Related manuals for ECB300

Brands by name

Popular brands