EnGenius ECB300 Manual Download Page 74

Page: 74 / 113

7.4.3

PPP over Ethernet (PPPoE)

This protocol is used by most DSL services worldwide.
Select this option if you have a DSL connection.
Enter the username and password provided by your ISP.

PPP over Ethernet (PPPoE)
Login

Username assigned to you by the ISP

Password

Password for this username.

Service Name

You can assign a name for this service. (Optional)

MTU

The maximum size of packets.
Do not change unless mentioned by the ISP.

Type

You can choose the method that the router maintains connection with the ISP.

Keep Connection:

The device will maintain a constant connection with the ISP.

Automatic Connection:

The device will only initiate connection to the ISP when there is an

Internet connection request made from a LAN device.

Manual Connection:

The user will need to manually connect to the ISP by clicking the

Connect

button.

Idle Timeout:

When the connection type is

Automatic Connection

, when Internet traffic is idle, then the

device will automatically disconnect from the ISP.
Please specify the Idle time in minutes.

Summary of Contents for ECB300


















































































































Search results

Summary of Contents for ECB300

Reviews:

Related manuals for ECB300

Brands by name

Popular brands

EnGenius ECB300, Manual

Search results

Summary of Contents for ECB300

Reviews:

Related manuals for ECB300

Brands by name

Popular brands