EnGenius ECB300 Manual Download Page 53

Page: 53 / 113

6.5

Security

The

Security

option in the

Wireless

menu allows you to set the wireless security settings.

Note:

Only in Access Point / WDS AP / Router and Repeater mode.

Security (Access Point / WDS AP / Router / Repeater mode)
SSID Selection

Select the SSID that the corresponding security settings will apply to.

Separate

Separating the SSID from each other (or use of STA) prevents communication and data sharing
between wireless stations associated with the SSIDs.

Broadcast SSID

Disabled

, the ECB300 will not broadcast the SSID. It will be invisible to the clients.

WMM

Wi-Fi Multi-Media is a Quality of Service protocol which prioritizes traffic in the order according
to voice, video, best effort, and background.

Note

: In certain situations, WMM needs to be enabled to achieve 11n transfer speeds.

Summary of Contents for ECB300


















































































































Search results

Summary of Contents for ECB300

Reviews:

Related manuals for ECB300

Brands by name

Popular brands

EnGenius ECB300, Manual

Search results

Summary of Contents for ECB300

Reviews:

Related manuals for ECB300

Brands by name

Popular brands