background image

27

 

 

5. To use the Music/Message-On-Hold feature: Connect one end of a
     standard audio cable into a radio or audio player, and plug the other
    (3.5 mm) end into the MOH jack on back of the base.

    

Notes:

 

    Recommended phone line features from the local phone company:
    Multiple phone lines  hunt group  is a useful feature and works well
    with this phone system. This feature  ties  multiple phone lines to a
    single phone number. When an outside caller calls this common
    phone number, the phone company automatically finds a free line.
    In a hunt group, the Call Waiting and the Caller ID with Call Waiting

nd

    (or called Type II Caller ID) features are unnecessary because a 2

        

call will come in on a separate line, rather than on the same line. For 

nd  

    a 2 call coming in on a separate line, the phone system's built-in
    Call Waiting feature will alert the user and allow the user to toggle
    between 2 lines.

Multi-base setups:

EnGenius DuraFon PRO has the capability to expand the coverage or
capacity.
Re: For best performance, maintain a distance of at least 10 meters
       (about 30 feet) between any two base stations. 
* Expanding coverage :
  Parallel connects all L1/L2/L3/L4 in each base as below schematic
  (up to 8 bases), the use coverage will be several times increased.

  

Note:

 Telephone calls cannot be handed off  between base units.

 

Legacy

 

PBX

 

1234

1234

1234

 

Base-1

Base-2

Base-3

 

 

 

   

    

    

Getting Started

Summary of Contents for Durafon SP9228-Pro



































































Reviews: