34
The broadcast will be over once user release the key.
2.
You need to notice that there is no bi-bi-beep sound when receiving a
broadcast.
3.
You can press the
SILENT
(Left) soft key if you choose to ignore the call.
The
SILENT
key operation is valid only for the current call. You can silent
all broadcast by turning off the ringer to set auto-silence from the
handset menu.
Redial (For DuraFon PRO only)
1. Press
REDIAL
(Left) soft key.
2. The LCD shows the last phone number dialed. To dial this number, press
DIAL
(Left) soft key.
3. Use
or
Key to scroll through the last 10 phone numbers dialed.
Select and press
DIAL
key.
Note: Intercom numbers (Handset ID) are not stored in the last 10 numbers
dialed log.
Receiving a Telephone Call (For DuraFon PRO only)
1. When an incoming call arrives, the handset will ring or vibrate unless the ringer
has been turned off.
2. If the handset is on the charger cradle (ringer will be temporarily switched to
“Ring” if it has been set to “Vibrate”), lift the handset and start the
conversation.
3.
If the handset is not on the cradle, press any key (except
, and the
SILENT
soft key) to answer.
4.
During the call, press and hold the
key, the speakerphone is active.
Notes:
1.
You can press
SILENT
(Left) soft key if you choose to ignore the call.
Unlike turning off the ringer (from the handset menu), the
SILENT
key operation is valid only for the current call.
2.
If Caller ID service is available, the LCD will display the incoming call
information. If the LCD shows “Private” or “Unknown”, the caller’s
