EnGenius DuraFon PRO User Manual Download Page 14

Page: 14 / 74

display status, message, menu selections, or user-editable
alphanumerical characters.

e. The last line displays the left and right soft keys.

Re: There is only right soft key in idle mode of DuraWalkie.

Note:”

◎

”means only shown on DuraFon PRO handset.

2. Ringer

a. Rings to an incoming call.

b. Distinctive alert sounds indicating various events:

(1) Single Beep: successful key entry

(2) Double beep: failed operation or invalid key entry, also

indicates power on/off

(3) Periodic 1-Long-2-Short Beep (repeat every 10 seconds):

low battery warning

(4) Periodic 1-Long-2-Short Beeps (repeat every 30 seconds):

indicates a call is on-hold

TALK/FLASH/



(

)(For DuraFon PRO only)

a. Places or answers a telephone or intercom call

b. Sends a Flash signal to phone line to retrieve a dial tone after

the call ends, or to perform the call waiting feature provided by
local phone companies during a call.

c. Press and hold the key for one second to enable/disable

speakerphone

KEYLOCK/



(

)(For DuraWalkie only)

a. In Idle mode, press to lock up the keypad

In 2-Way/Intercom mode, press and hold

key to

enable/disable speakerphone.

5. 2-WAY/INTERCOM(

)

a. Places an intercom call to another handset ID or a group ID.

b. Intercom calls are digital, full duplex, and are conducted

without the assistance from the base.

Press and hold

key for one second to enable/disable

speakerphone.

6. BROADCAST(

)

Half duplex broadcasting to handsets for immediate announcement

Summary of Contents for DuraFon PRO











































































Search results

Summary of Contents for DuraFon PRO

Reviews:

Related manuals for DuraFon PRO

Brands by name

Popular brands

EnGenius DuraFon PRO, User Manual

Search results

Summary of Contents for DuraFon PRO

Reviews:

Related manuals for DuraFon PRO

Brands by name

Popular brands