29
Basic Operations
Operation Modes
Both the base station and handset have levels of operation at which time only
certain procedures of functions can be performed.
Re:The main difference between DuraFon PRO and DuraWalkie is the handset of
DuraFon PRO has the capability to make telephone calls, and the handset of
DuraWalkie does not.
A. Base Operation Modes
1.
IDLE mode
- this is the default mode. The intercom, broadcast, and volume
keys are active in IDLE mode.
2.
TALK mode
- the base operates in this mode during a phone call, intercom use,
and broadcast operation. The “In Use”, “Intercom”, and “Broadcast” LED will
light up respectively.
3.
REGISTRATION mode
- the base enters this mode by pressing the
REG
button
for three seconds. There are no active base unit keys once this mode has been
entered. Four LEDs will light up in Registration mode.
B. Handset Operation Modes
1.
IDLE mode
- this is the default mode.
a. If there is no on-going activity, the handset automatically goes
into SLEEP/IDLE mode to save battery power.
b. The handset can be turned off completely by holding down the
END
key for 3 seconds.
c. The idle screen display (custom name) can be edited.
d. The 2-digit number represents the handset ID.
2.
MENU mode
a. Press the Right soft function key to activate MENU mode.
b. In MENU mode, the handset settings and information
contained in memory can be changed.
c. The functions available through the MENU selection are
covered in greater detail from page 52.
d. The MENU structure display as below:
