ENFORCER
®
High-Speed Latching Continuity Tester
SECO-LARM
®
U.S.A., Inc
3
Performing Tests:
WARNINGS:
-
Only test unpowered circuits.
-
Never operate a vehicle or other machinery while using the tester. Set the tester to latch mode and check
only after testing is completed.
1.
Contacts
When experiencing trouble with a magnetic
contact such as false alarms or intermittent
operation, connect the tester at various points
in the system using latch mode while
attempting to reproduce failure conditions. This
procedure will help identify the trouble
component.
2.
Vibration
Vehicle alarms, tamper switches and other devices and wiring that are exposed to frequent
vibration or bending can begin to experience fatigue, causing micro-second open circuits.
Connect the tester at various points in the system, and use the latch mode while operating the
device.
3.
Shock/vibration sensors
The latching tester can simplify installation and calibration of shock and vibration sensors.
When adjusting sensitivity, use the tester in place of alarm panel or other receiving device.
When experiencing false alarms or false negatives, use the tester in latch mode at various
points in the system to detect which component is over sensitive or responding too slowly.
Set Circuit Type
N.O.:
To make the tester
trigger when the circuit is
closed, select N.O. under
Circuit Type.
N.C.:
To make the tester
trigger when the circuit is
open, select N.C. under
Circuit Type.
Beeper
Visual
Power (OFF)
Latch mode
Auto-reset
Real-time
Headlight Switch
WARNING: DO NOT
PERFORM TESTS ON LIVE
CIRCUITS
Usage Notes
Low Battery:
Power LED will
flash to show low battery.
LED Light:
Use when working
in low-light conditions.
Reset Button:
Press before
performing tests and after
changing settings.
Beeper
Visual
Power (OFF)
Latch mode
Auto-reset
Real-time
Headlight Switch
WARNING: DO NOT
PERFORM TESTS ON LIVE
CIRCUITS
Magnetic Contact
Beeper
Visual
Power (OFF)
Latch mode
Auto-reset
Real-time
Headlight Switch
WARNING: DO NOT
PERFORM TESTS ON LIVE
CIRCUITS
Vibration Detector
Beeper
Visual
Power (OFF)
Latch mode
Auto-reset
Real-time
Headlight Switch
WARNING: DO NOT PERFORM
TESTS ON LIVE CIRCUITS
